Electrical engineering, electronics, semiconductors

The production of disk motors has to meet the highest mechanical accuracy requirements. In order to ensure perfect functioning of the disk drives the drive ...

The “eddyNCDT” system offers many advantages for the non-contact monitoring of the mechanical condition of the commutator in electric D.C. motors or ...

The term „co-planarity“ discribes the proper seating of the tips of fine-pitch device leads on the copper pads on a PCB prior to solder process. The ...

Ingots are sawn into thin wafers for the production of photovoltaic modules. However, geometric deviations can occur during the manufacture of ingots which ...

In the field of the manufacture of plastic panels, thickness profile measurements must be carried out due to the necessary quality assurance. For this ...

Banding machines are used during the manufacture of cables in order to provide cables with a protective sheath. The wire runs centrally through a roll ...

Many direct current electric motors operate with carbon brushes for the current transmission. optoNCDT laser sensors are used to monitor the vibration ...

The capacitors must be dipped into a bath of solvent during the capacitor production. In doing so, it is important that the blanks only have a specified ...

Metal teeth for saw blades are soldered in soldering machines. In doing so, a fast IR temperature measurement provides exact regulation and prevents mechanical ...

When optical data carriers are produced, the data are initially transferred to a master. Depending on the number of copies, different dies made of nickel ...

Even the layman can detect wether a relay is energized or not. The question how on the other hand, is difficult to answer even for the expert. What he ...

The height of the solder wave is an important criterion to get highest quality results during soldering PCB’s on wave soldering machines. There are ...