Turbocharger speed sensors
The DZ140 turbo speed sensors with integrated temperature measurement are designed for direct installation into the turbo compressor housing. Development of the system has taken into account the extreme environments inside both large test cell and on-vehicle engine compartments.
Robust miniature controller
All electronics are located in a miniature aluminium housing for easy integration into the engine compartment. Compared to other eddy current speed measuring systems, the DZ140 offers much higher immunity to interference, both in test rig operations and on-vehicle testing.
The DZ140 eddy current measuring system is resistant to oil and dirt, which is a key advantage over optical speed measuring systems. In particular, this helps to achieve high precision measurement results on a continuous basis. In addition, the sensor is able to measure ambient temperature
A tri-color LED on the controller indicates when the sensor has reached the ideal distance from the turbocharger blades, which helps to minimise installation times. The system is backwards-compatible with previous sensor models, allowing easy sensor replacement. The sensor is connected to the electronics via a special BNC connector. An industrial push-pull connector provides a secure connection between electronics, power supply and analogue outputs.
Measurements for aluminium and titanium blades
The DZ140 is the only measuring system to measure both aluminium and titanium blades. The sensors can be mounted at a relatively large distance from the blade. The maximum distance of 2.2mm enables secure, reliable operation.
• Distance to target up to 2.2mm
• Sensor with integrated temperature measurement
• Speed range 200 RPM to 400,000 RPM
• Highest immunity and accuracy
• Miniature controller for easy integration in the engine compartments
• Operating temperature up to 285°C
back to product group "Eddy current sensors"