New: Laser scanner with blue laser line
Blue laser profile sensors are ideal for high precision 2D profile measurements on shiny surfaces, transparent objects and hot targets.
The scanCONTROL BL laser profile sensors are specifically designed to measure surface features such as gap, profile, width, step height, flatness and angle on red hot glowing surfaces, shiny or highly polished surfaces and transparent materials such as plastics, glass, optical components and film/substrates. The sensors are designed for where red laser diode sensors do not perform well.
The scanCONTROL BL models have been designed in all other aspects identical to the scanCONTROL series that use a red laser diode. This means same mechanical dimensions, measurement geometry and software interface. Therefore any application where a conventional scanCONTROL laser profile sensor has been used, the blue version can be automatically dropped in place.
The Blue Laser scanners are available in three classes: Compact (2900/BL, 2700/BL), High-Speed (2950/BL, 2750/BL) and Smart (2910/BL, 2710/BL).
New: scanCONTROL 29xx-10/BL with 10mm laser line
The NEW scanCONTROL 29xx-10/BL laser profile sensor features a sharp focused 10mm blue laser line. With a resolution of 1280 points it is ideal for applications where absolute precision is required on small or difficult to measure surfaces e.g. (semi) transparent, red-hot glowing and organic materials.
- 10mm field of view for both Z & X Axis
- Z Axis reference resolution from 1μm
- X Axis 1280 points/profile
- X Axis resolution 7.8μm
- Compact sensor with integrated electronics
• Measuring range up to 265mm (z-axis)
• Profile frequency up to 2,000Hz
• Measurement rate up to 2,560,000 points/sec
• Compact design
• Integrated electronics
• Ethernet GigE-Vision / RS422
• Direct integration into PLC
back to product group "Laser Profile Sensors"