gapCONTROL Setup Software Gap measurement and evaluation means to be a complex task. In detail, there are different definitions of how the optical gap is defined for different industries and measuring targets. The gapCONTROL Setup Software has been precisely adjusted to the requirements of the different gap measurements and it makes configuration of gapCONTROL sensors quick and easy. The gapCONTROL Setup Software, together with the gapCONTROL sensors, represents a complete solution for automated gap measurement. After parameterisation, the sensor operates in standalone mode. However, the software can be used for the visualisation of the measured values. Download gapCONTROL Setup Software Setup gapCONTROL sensors The gapCONTROL sensors offer different options and settings. All these settings can be accessed with the Configuration Tools software. One possibility is accessing directly the image of the sensor matrix to set up the sensor optimum to the target. This view displays a live image of the matrix and helps to eliminate reflections on the target surface. Display, save, load and export profiles The gapCONTROL Setup Software allows both profiles and measuring results (e.g. gap width) to be saved. Stored profiles, even without a gapCONTROL sensor connected, can be re-loaded, and all parameters of the evaluation can be tested on this offline data. Several example profiles are already included with the standard installation of the gapCONTROL Setup Software, and they can largely be used to test the how the software works. Gap modes The user-friendly, intuitive software guides the user through the program. In the first step, a gap mode is chosen from a wide selection of gap types. "Basic Gaps", "Projected Gaps" and „Groove Gaps“ require little or no settings."Advanced Gaps" provides the user with configurable advanced parameters, executing complex gap measurement tasks. Set up and configuration of gap measurements The next step is to specify the search algorithms for the right and left-hand edges. The simple "Basic Gaps", "Groove Gaps" and "Projected Gaps" already contain the correct algorithms. In addition, the software allows the user to determine the algorithms for measuring the offset (flush) and the projection between both sides.Global sensor settings can also be made quickly. For dynamic processes, gapCONTROL also offers a tracking functionality, e.g. following the centre position. Measurement output For output of measured values, these can be configured with freely assigned values. As well as measurement value output via Ethernet (Modbus TCP protocol, UDP) and RS422 (Modbus RTU protocol or ASCII format), additional digital switch signals and analogue measuring values can be output by using an output unit. The last step comprises the transmission of the entire parameter set to the gapCONTROL scanner, which allows up to 15 parameter sets to be stored and to activate these by applying a control command. The profile analysis now operates entirely autonomously and directly in the scanner without connection to a PC. Analysis program for measurement value sequence Using the "Result Monitor" analysis program, selected measurement value sequences of recorded profiles and live profiles can be displayed and analysed, enabling the evaluation of measurements. Additionally, an integrated cgm analysis (capability gauge measurement), and further statistical parameters (e.g. limit value exceeded, average values) are available. The software allows these values to be exported for archive purposes or for further analysis in calculation tables. Related links Download Laser Scanner Software Glossary: Measuring principle "Laser line triangulation" Add to watchlist Already added to watchlist back to product group "Software"