New Products

The eddyNCDT 3001 is a new high performance eddy current sensor in an extremely compact package. Although it is a similar size to typical proximity and inductive sensors, the measuring performance is much ...

eddyNCDT 3001

The eddyNCDT 3005 is a compact, high performance eddy current measurement system for fast, high precision displacement measurements including vibration, shaft runout, concentricity, gap, eccentricity, ...

eddyNCDT 3005

Non-contact, inductive displacement sensors from Micro-Epsilon operate according to the eddy current measuring principle. Unlike conventional, inductive displacement sensors, they measure on ferromagnetic ...

eddyNCDT 3060

The capaNCDT 6110 single channel capacitive electronics is an extremely compact and low cost controller, compatible with all Micro-Epsilon capacitive sensor ranges. Designed to be robust and simple to ...

capaNCDT 6110

The capacitive DT6112 controller is the entry model for dynamic measurement tasks. A bandwidth of up to 20kHz (-3dB) enables reliable monitoring of fast processes. The DT6112 controller is compatible ...

DT6112 controller

Equipped with an analogue output and an RS485 interface, the capacitive DT6120 controller is the entry model for high resolution, capacitive displacement measurement. Due to its extremely compact size, ...

DT6120 controller

The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system ...

capaNCDT 61x0/IP

Protected to IP68, the DT6110/IP capacitive controller is designed for measurement tasks in industrial environments. The DT6110/IP controller is available with either a voltage or current output, and can ...

DT6110/IP controller

Classified to IP68, the DT6120/IP capacitive controller is designed for measurement tasks in industrial applications. In addition to either a voltage or current output, the DT6110/IP controller offers ...

DT6120/IP controller

The DT6222 capacitive controller is used for dynamic, capacitive measurement tasks. A frequency response of up to 20kHz (-3dB) enables reliable monitoring of fast processes. As well as analogue outputs, ...

capaNCDT 6222 controller

The combination sensor, often referred to as the combiSENSOR, is a twin sensor technology in one housing. The sensor combines both eddy current and capacitive sensor technologies to allow precise thickness ...

Combisensor

The capaNCDT DTV series is designed for non-contact detection of Disc Thickness Variation (DTV) including capacitive sensors for multi-track measurements and a case with the measurement channel for mobile ...

capaNCDT DTV

The optoNCDT 1320 is a new laser triangulation sensor with compact size for displacement, distance and position measurements. Due to its compact design with integrated controller, the sensor is ideally suitable for installation into restricted spaces.

optoNCDT 1320

The optoNCDT1420 offers a unique combination of speed, size, performance and application versatility for displacement, distance and position measurements. The compact triangulation sensor achieves a high measurement accuracy and measuring rates of up to 4kHz.

optoNCDT 1420

The optoNCDT 1420 laser triangulation sensors are now also available with laser class 1. With this laser class, the radiated power is at max. 390µW, which is significantly lower than laser class 2. Therefore, costly protective measures are no longer necessary.

optoNCDT 1420 CL1

The new optoNCDT 1750 laser sensor is designed for precise and high speed displacement, distance and position measurements. New evaluation algorithms and enhanced components provide highest accuracy and ...

optoNCDT 1750

The optoNCDT 2300-2DR (Direct Reflection) high precision laser triangulation sensor is designed for measurements on highly polished, reflective, shiny and mirrored targets with a resolution down to 30nm.  An ...

optoNCDT 2300-2DR

The new thicknessSENSOR is a complete solution that has been designed for customers who require a simple, high accuracy, compact, thickness measurement system that is fully assembled, ready to use and ...

thicknessSENSOR

confocalDT IFS2404 displacement sensors are designed for high precision applications in restricted installation space. Based on a special lens technology, these sensors provide high resolution and a small ...

confocalDT IFS2404

The confocal IFS2406 series of sensors are designed to offer high performance measurement yet with compact sensor geometry. The performance of the IFS2406 series is almost as high as the market leading ...

confocalDT IFS2406

The confocal chromatic confocalDT IFS2407/90-0,3 90° sensor is designed for precision displacement and surface roughness measurements. The sensor is equipped with a 90° lens and is therefore ideally ...

confocalDT IFS2407/90-0,3

The confocalDT IFS2407-0,1 sensor is designed for high precision measurements of distance, roughness and thickness. The high numerical aperture (NA 0.8) enables the thickness measurement of transparent ...

confocalDT IFS2407-0,1

The entry level IFC2421 and IFC2422 confocal controllers are designed to offer a high resolution, high accuracy yet low cost solution where alternative solutions such as laser triangulation and other optical ...

confocalDT IFC2421/22

The confocalDT 2471 HS controllers are used for fast distance and thickness measurements of highly reflecting shiny surfaces, enabling measuring rates up to 70kHz without having to use an external light ...

confocalDT IFC2471HS

The new MSC7401 controller is designed to be operated with LVDT and LDR measuring gages and displacement sensors. Due to its robust aluminium housing protected to IP67, this single-channel controller is ...

Controller MSC7401

The miniature draw-wire sensors of the MK series are specially designed for use in high-volume production. Due to the favourable price and the compact size of the sensor, new potential designs and cost ...

wireSENSOR WPS-MK60 analogue

The miniature draw-wire sensors of the MK series are specially designed for use in high-volume production. Due to the favourable price and the compact size of the sensor, new potential designs and cost ...

wireSENSOR WPS-MK60 digital

Similar to the MK88, the MK88-U45R draw-wire sensor is specially designed for high volume, mobile applications such as mobile cranes and elevating work platforms. The combination of its size, robustness ...

wireSENSOR WPS-MK88-U45R

Miniature MT draw-wire sensors are the smallest draw-wire sensors worldwide. They are designed specifically for test applications where high wire accelerations occur such as crash tests. Their miniature ...

wireSENSOR MT

The high resolution infrared camera with microscope lens enables precise temperature measurements of miniature parts. In addition to overall images and videos, even detailed macro shooting of individual ...

thermoIMAGER Microscope lens

MoldCONTROL is a thermography solution for the early detection of defects and quality fluctuations in injection moulded parts. The system is particularly well suited to large, complex, multi-layered or ...

moldCONTROL

State-of-the-art colour measurement technology makes the new colourSENSOR CFO100 and CFO200 the ideal solutions across multiple industries. Used within the food industry, automotive, printing and packaging ...

Compact colour sensor