Wood industry

For thickness and width measurement of plates, planks and beams, two optoNCDT laser sensors are used.If this arrangement is complemented by further sensors, one synchronized measurement process can combine the inspection of torsion with control…

In fully automated sawmills, the position of wooden boards before sawing must be determined so that they can be cut precisely. Micro-Epsilon laser displacement sensors detect the position of the boards from two sides and output the board position…

In order to ensure consistent colour of different front panels, colour sensors from Micro-Epsilon are used. The sensors inspect the colour of the kitchen fronts in the painting plant. Colour sensors ensure that the colour shade is within the specified…

Laser scanners from Micro-Epsilon are used for the profile measurement of parquet boards and baseboards. They inspect geometric characteristics such as groove height, gap dimensions and absolute dimensions to ensure homogeneous product quality. …

Laser scanners from Micro-Epsilon are used to inspect wood reliefs. They check the groove depth and provide reliable measurement results regardless of the type of wood.

When printing woods with decors, optoCONTROL micrometers are used to control the positions of the plate. This prevents the printing head from colliding with the plate. These laser micrometers measure directly on wood and monitor the tools. …

During the manufacture of veneer strips from laminated wood, the precision of the cutting disk determines the quality of the final product. High demands are placed on the veneer strips in terms of dimensional conformance. The thickness of the…